_maxol-breaks-ground-on-3-6mre-development-of-belvoir-service-station.jpg "Maxol breaks ground on £3.6m re-development of Belvoir Service Station from wash command in unix Video Screenshot Preview")
GalleryPlay Video:
(Note: The default playback of the video is HD VERSION. If your browser is buffering the video slowly, please play the REGULAR MP4 VERSION or Open The Video below for better experience. Thank you!)
⏲ Duration: 2:22
👁 View: 19.7M times
✓ Published: 18-Jun-2024
👁 View: 19.7M times
✓ Published: 18-Jun-2024
Description:
Maxol, Northern Ireland’s leading family-owned forecourt and convenience retailer, is investing £3.6million in a significant redevelopment and expansion of Maxol Belvoir Service Station in Belfast which will see the building increase by over 300 square metres.<br/><br/>The investment at Shaws Bridge is part of a wider five-year capital investment programme worth £84m that Maxol is delivering across its network to meet the growing demand for convenience-led forecourt services that include coffee, groceries and food-to-go.<br/><br/>Maxol’s sustainable forecourt design will be fully implemented at Maxol Belvoir. A host of cutting-edge technologies will be used to reduce the site’s existing carbon footprint which include the use of LED lighting; glass door refrigeration to reduce the refrigeration load by up to 60%; photovoltaic (solar) panels to reduce electrical import requirements; solar efficient glazing to reduce solar gain in the summer and heat loss in winter; exhaust heat pump technology to maximise building heat retention and reduce heating loads; and an energy management system to monitor and control the overall energy usage on the site and to verify what savings are being achieved by each of the technologies used.<br/><br/>Forecourt developments will see car parking facilities more than double from the current 18 to 48 including four disability parking bays. Pay at Pump technology will be introduced to ensure greater convenience for customers during busy trading periods, the drive through car wash will be re-located on the new site and a new forecourt canopy with LED lighting will also be added.<br/><br/>An EV charging hub, the third in Maxol’s estate in Northern Ireland, is planned as a second stage of the development with six ultra rapid chargers and will open in 2025 under the Maxol Recharge brand.
Maxol, Northern Ireland’s leading family-owned forecourt and convenience retailer, is investing £3.6million in a significant redevelopment and expansion of Maxol Belvoir Service Station in Belfast which will see the building increase by over 300 square metres.<br/><br/>The investment at Shaws Bridge is part of a wider five-year capital investment programme worth £84m that Maxol is delivering across its network to meet the growing demand for convenience-led forecourt services that include coffee, groceries and food-to-go.<br/><br/>Maxol’s sustainable forecourt design will be fully implemented at Maxol Belvoir. A host of cutting-edge technologies will be used to reduce the site’s existing carbon footprint which include the use of LED lighting; glass door refrigeration to reduce the refrigeration load by up to 60%; photovoltaic (solar) panels to reduce electrical import requirements; solar efficient glazing to reduce solar gain in the summer and heat loss in winter; exhaust heat pump technology to maximise building heat retention and reduce heating loads; and an energy management system to monitor and control the overall energy usage on the site and to verify what savings are being achieved by each of the technologies used.<br/><br/>Forecourt developments will see car parking facilities more than double from the current 18 to 48 including four disability parking bays. Pay at Pump technology will be introduced to ensure greater convenience for customers during busy trading periods, the drive through car wash will be re-located on the new site and a new forecourt canopy with LED lighting will also be added.<br/><br/>An EV charging hub, the third in Maxol’s estate in Northern Ireland, is planned as a second stage of the development with six ultra rapid chargers and will open in 2025 under the Maxol Recharge brand.
Share with your friends:
Whatsapp | Viber | Telegram | Line | SMS
Email | Twitter | Reddit | Tumblr | Pinterest
_how-to-create-pressure-network-profile-in-civil-3d.webp "Understanding parts lists is essential for organizing and managing the components required for a project. In the context of engineering, construction, and manufacturing, a parts list (also known as a Bill of Materials or BOM) is a comprehensive list of raw materials, components, and assemblies needed to construct, manufacture, or repair a product or project.<br/><br/>### Components of a Parts List<br/><br/>1. **Item Number**:<br/> - Unique identifier for each part.<br/> - Helps in tracking and referencing parts easily.<br/><br/>2. **Part Name/Description**:<br/> - Detailed description of the part.<br/> - Includes specifications such as dimensions, material, and any other relevant characteristics.<br/><br/>3. **Quantity**:<br/> - Number of each part required.<br/> - Essential for ordering and inventory management.<br/><br/>4. **Part Number/Code**:<br/> - Manufacturer's or supplier's unique code for the part.<br/> - Useful for ordering and ensuring the correct part is used.<br/><br/>5. **Supplier Information**:<br/> - Details of the supplier or manufacturer.<br/> - Includes contact information and possibly pricing.<br/><br/>6. **Unit of Measure**:<br/> - How the part is measured (e.g., pieces, meters, kilograms).<br/> - Important for ordering the correct amount.<br/><br/>7. **Cost**:<br/> - Unit cost of each part.<br/> - Used for budgeting and cost management.<br/><br/>8. **Notes/Comments**:<br/> - Any additional information relevant to the part.<br/> - Could include assembly instructions, special handling requirements, or substitution options.<br/><br/>### Creating a Parts List in AutoCAD<br/><br/>AutoCAD offers features to create and manage parts lists, particularly useful in CAD drawings for engineering projects.<br/><br/>#### Step-by-Step Guide to Creating a Parts List in AutoCAD<br/><br/>1. **Draft the Drawing**:<br/> - Complete the drawing with all the necessary components and parts.<br/> - Use commands like `LINE`, `CIRCLE`, `POLYLINE` to draw the components.<br/><br/>2. **Insert Blocks for Components**:<br/> - Use the `BLOCK` command to create reusable components.<br/> - Each block should represent a different part.<br/><br/>3. **Annotate the Drawing**:<br/> - Use the `TEXT` or `MTEXT` commands to label parts.<br/> - Include details such as part names, numbers, and descriptions.<br/><br/>4. **Create an Attribute Block**:<br/> - Use the `ATTDEF` command to define attributes for blocks.<br/> - Attributes can include part number, description, quantity, and any other relevant information.<br/><br/> Example:<br/> ```<br/> ATTDEF<br/> Enter the Tag: PART_NO<br/> Enter the Prompt: Enter Part Number:<br/> Enter the Default: 1234<br/> Specify insertion point: (click or type coordinates)<br/> ```<br/><br/>5. **Insert Attribute Blocks**:<br/> - Insert the blocks with attributes into the drawing.<br/> - Use the `INS3RT` command and fill in the attribute values as prompted.<br/><br/>6. **Extract Attributes to Create the Parts List**:<br/> - Use the `DATAEXTRACTION` command to extract block attributes to a table.<br/> - Follow the Data Extraction wizard to select the blocks and attributes you want to include in your parts list.<br/><br/> Example:<br/> ```<br/> DATAEXTRACTION<br/> S")
_emotional-melodies-a-journey-through-the-heart-moonlight-heartbreak.webp "Whether you seek solace or catharsis, our emotional melodies hold space for your feelings. Let them wash over you, unraveling knots of joy and sorrow. Music heals where words fall short.<br/>")
_bl-hdk-bsy.webp "ಒಂದಂತೂ ಸ್ಪಷ್ಟ. ನ್ಯಾಯಾಲಯದ ಆದೇಶದಿಂದ ನಿಟ್ಟುಸಿರು ಬಿಟ್ಟಿರುವ ಯಡಿಯೂರಪ್ಪ, ತಮ್ಮ ವಿರುದ್ಧದ ರಾಜಕೀಯ ಪಿತೂರಿಯ ವಿರುದ್ಧ ಸಿಡಿದೇಳುತ್ತಾರಾ ಎಂಬುದು ಸದ್ಯಕ್ಕೆ ಕುತೂಹಲ ಮೂಡಿಸಿದೆ. <br/> <br/>One thing is clear. It is now interesting whether Yeddyurappa, who has given a sigh of relief from the court's order, will burst out against the political conspiracy against him. <br/> <br/>#BSYediyurappa, #BSYPocsocase #BLSanthosh #HDKumaraswamyn, #PMModi #BJPhighCommand,#KarnatakaBJP, #BSYandSons #BYRaghavendra #BJPFamilyPolitic#VSomanna <br/><br/>~HT.290~PR.28~ED.288~")
_333hz-angel-frequency-healing-short-meditation-124-pure-tone-124-intuition-inner-peace-healing-relaxation-spiritual-grow.webp "The 333 Hz frequency is known for its ability to connect you with angelic realms, enhance your intuition, and promote inner peace. Whether you're meditating, seeking healing, or simply need to relax, the 333Hz frequency can be a transformative addition to your daily routine.<br/><br/>Benefits of 333Hz Angel Frequency:<br/><br/>Spiritual Connection: Facilitates a deeper connection with angelic beings and higher spiritual realms.<br/><br/>Intuition Enhancement: Helps sharpen your intuitive abilities, making it easier to trust your inner guidance.<br/><br/>Emotional Healing: Assists in releasing emotional blockages and promotes a sense of calm and balance.<br/><br/>Meditation Aid: Enhances your meditation experience, helping you achieve a state of deep relaxation and focus.<br/><br/>Stress Relief: Reduces stress and anxiety, bringing a sense of tranquility and peace to your mind and body.<br/><br/>How to Use This Frequency:<br/><br/>Find a quiet and comfortable place to sit or lie down.<br/>Close your eyes and take a few deep breaths to relax.<br/>Play the video and allow the soothing sounds to wash over you.<br/>Focus on your breath and let go of any tension or stress.<br/>Visualize yourself surrounded by a warm, healing light as you listen.<br/><br/>Remember to Like, Comment, and Subscribe for more healing frequencies and meditation music!")
_surah-hasr-last-ayat-alllah-name-of-share.webp "surah baqrah beutiful Recitation Tilawat! 33 to 71 آیت! #quran <br/><br/><br/><br/><br/>Embark on a spiritual journey as we recite verses 33 to 71 of Surah Al-Baqarah, one of the most beloved chapters of the Quran. Let these profound verses wash over you, reminding you of Allah's unwavering guidance, love, and mercy.<br/><br/>Experience the tranquility and wisdom found within these sacred verses, as we seek solace and strengthen our faith.<br/><br/>#SurahAlBaqarah #QuranRecitation #HeartwarmingRecitation #PeaceAndTranquility #IslamicContent")
_soul-land-2-the-peerless-tang-sect-episode-51-english-sub.webp "million years, the heirs of Shrek Academy set out on an epic quest to revive the ancient glory of the Tang Sect. This is a tale of magic and martial prowess, where the old and the new collide in a spectacular fashion.<br/><br/>A legendary soul beast, ancient and powerful, emerges with the essence of the sun, moon, and stars. Alongside it, the divine embodiment of death commands awe and fear. At the same time, a revolutionary soul tool system has led to the Tang Sect's decline, ushering in an era of unprecedented technological advancements.")
_home-elevation-in-autocad.webp "Understanding parts lists is essential for organizing and managing the components required for a project. In the context of engineering, construction, and manufacturing, a parts list (also known as a Bill of Materials or BOM) is a comprehensive list of raw materials, components, and assemblies needed to construct, manufacture, or repair a product or project.<br/><br/>### Components of a Parts List<br/><br/>1. **Item Number**:<br/> - Unique identifier for each part.<br/> - Helps in tracking and referencing parts easily.<br/><br/>2. **Part Name/Description**:<br/> - Detailed description of the part.<br/> - Includes specifications such as dimensions, material, and any other relevant characteristics.<br/><br/>3. **Quantity**:<br/> - Number of each part required.<br/> - Essential for ordering and inventory management.<br/><br/>4. **Part Number/Code**:<br/> - Manufacturer's or supplier's unique code for the part.<br/> - Useful for ordering and ensuring the correct part is used.<br/><br/>5. **Supplier Information**:<br/> - Details of the supplier or manufacturer.<br/> - Includes contact information and possibly pricing.<br/><br/>6. **Unit of Measure**:<br/> - How the part is measured (e.g., pieces, meters, kilograms).<br/> - Important for ordering the correct amount.<br/><br/>7. **Cost**:<br/> - Unit cost of each part.<br/> - Used for budgeting and cost management.<br/><br/>8. **Notes/Comments**:<br/> - Any additional information relevant to the part.<br/> - Could include assembly instructions, special handling requirements, or substitution options.<br/><br/>### Creating a Parts List in AutoCAD<br/><br/>AutoCAD offers features to create and manage parts lists, particularly useful in CAD drawings for engineering projects.<br/><br/>#### Step-by-Step Guide to Creating a Parts List in AutoCAD<br/><br/>1. **Draft the Drawing**:<br/> - Complete the drawing with all the necessary components and parts.<br/> - Use commands like `LINE`, `CIRCLE`, `POLYLINE` to draw the components.<br/><br/>2. **Insert Blocks for Components**:<br/> - Use the `BLOCK` command to create reusable components.<br/> - Each block should represent a different part.<br/><br/>3. **Annotate the Drawing**:<br/> - Use the `TEXT` or `MTEXT` commands to label parts.<br/> - Include details such as part names, numbers, and descriptions.<br/><br/>4. **Create an Attribute Block**:<br/> - Use the `ATTDEF` command to define attributes for blocks.<br/> - Attributes can include part number, description, quantity, and any other relevant information.<br/><br/> Example:<br/> ```<br/> ATTDEF<br/> Enter the Tag: PART_NO<br/> Enter the Prompt: Enter Part Number:<br/> Enter the Default: 1234<br/> Specify insertion point: (click or type coordinates)<br/> ```<br/><br/>5. **Insert Attribute Blocks**:<br/> - Insert the blocks with attributes into the drawing.<br/> - Use the `INS3RT` command and fill in the attribute values as prompted.<br/><br/>6. **Extract Attributes to Create the Parts List**:<br/> - Use the `DATAEXTRACTION` command to extract block attributes to a table.<br/> - Follow the Data Extraction wizard to select the blocks and attributes you want to include in your parts list.<br/><br/> Example:<br/> ```<br/> DATAEXTRACTION<br/> S")
_how-create-first-ground-home-plan-in-autocad.webp "Understanding parts lists is essential for organizing and managing the components required for a project. In the context of engineering, construction, and manufacturing, a parts list (also known as a Bill of Materials or BOM) is a comprehensive list of raw materials, components, and assemblies needed to construct, manufacture, or repair a product or project.<br/><br/>### Components of a Parts List<br/><br/>1. **Item Number**:<br/> - Unique identifier for each part.<br/> - Helps in tracking and referencing parts easily.<br/><br/>2. **Part Name/Description**:<br/> - Detailed description of the part.<br/> - Includes specifications such as dimensions, material, and any other relevant characteristics.<br/><br/>3. **Quantity**:<br/> - Number of each part required.<br/> - Essential for ordering and inventory management.<br/><br/>4. **Part Number/Code**:<br/> - Manufacturer's or supplier's unique code for the part.<br/> - Useful for ordering and ensuring the correct part is used.<br/><br/>5. **Supplier Information**:<br/> - Details of the supplier or manufacturer.<br/> - Includes contact information and possibly pricing.<br/><br/>6. **Unit of Measure**:<br/> - How the part is measured (e.g., pieces, meters, kilograms).<br/> - Important for ordering the correct amount.<br/><br/>7. **Cost**:<br/> - Unit cost of each part.<br/> - Used for budgeting and cost management.<br/><br/>8. **Notes/Comments**:<br/> - Any additional information relevant to the part.<br/> - Could include assembly instructions, special handling requirements, or substitution options.<br/><br/>### Creating a Parts List in AutoCAD<br/><br/>AutoCAD offers features to create and manage parts lists, particularly useful in CAD drawings for engineering projects.<br/><br/>#### Step-by-Step Guide to Creating a Parts List in AutoCAD<br/><br/>1. **Draft the Drawing**:<br/> - Complete the drawing with all the necessary components and parts.<br/> - Use commands like `LINE`, `CIRCLE`, `POLYLINE` to draw the components.<br/><br/>2. **Insert Blocks for Components**:<br/> - Use the `BLOCK` command to create reusable components.<br/> - Each block should represent a different part.<br/><br/>3. **Annotate the Drawing**:<br/> - Use the `TEXT` or `MTEXT` commands to label parts.<br/> - Include details such as part names, numbers, and descriptions.<br/><br/>4. **Create an Attribute Block**:<br/> - Use the `ATTDEF` command to define attributes for blocks.<br/> - Attributes can include part number, description, quantity, and any other relevant information.<br/><br/> Example:<br/> ```<br/> ATTDEF<br/> Enter the Tag: PART_NO<br/> Enter the Prompt: Enter Part Number:<br/> Enter the Default: 1234<br/> Specify insertion point: (click or type coordinates)<br/> ```<br/><br/>5. **Insert Attribute Blocks**:<br/> - Insert the blocks with attributes into the drawing.<br/> - Use the `INS3RT` command and fill in the attribute values as prompted.<br/><br/>6. **Extract Attributes to Create the Parts List**:<br/> - Use the `DATAEXTRACTION` command to extract block attributes to a table.<br/> - Follow the Data Extraction wizard to select the blocks and attributes you want to include in your parts list.<br/><br/> Example:<br/> ```<br/> DATAEXTRACTION<br/> S")
_how-to-create-pressure-network-profile-in-civil-3d.jpg)
_emotional-melodies-a-journey-through-the-heart-moonlight-heartbreak.jpg)
_bl-hdk-bsy.jpg)
_333hz-angel-frequency-healing-short-meditation-124-pure-tone-124-intuition-inner-peace-healing-relaxation-spiritual-grow.jpg)
_surah-hasr-last-ayat-alllah-name-of-share.jpg)
_soul-land-2-the-peerless-tang-sect-episode-51-english-sub.jpg)
_home-elevation-in-autocad.jpg)
_how-create-first-ground-home-plan-in-autocad.jpg)
![[+]](/images/menu.gif){kind=small}